Entering electronic team names with the MP-70/50 series.

Entering electronic team names with the MP-70/50 series.





    • Related Articles

    • Entering the Team Names (MP-80/60)

    • Updating the Score on an MP-70/50 series controller.

      Follow these steps to enter or update the score: Press HOME SCORE or VISITOR SCORE . Press one of the following keys to adjust the score by the increment indicated: +1 , +2 , +3 , -1 . Additionally you could also adjust the score manually by ...

    • Managing Time Outs on MP-70/50 series.

      NOTE:   The clock must be stopped before you can begin a timeout. To change the duration of the timeout timer or to program the timeout timer to appear on the scoreboard, see the sport-specific settings. The horn sounds at the end of the timeout only ...

    • Setting up a Gen3 receiver with MP-73 or MP-53

      As with all wireless technology a receiver needs to be tuned to the correct frequency or band to receive a wireless signal from a specific transmitter. For our Generation 3 wireless radio's and controllers it's no different. Step 1: Get the ...

    • How to setup a scoreboard with an MP-80 controller.

      How to Set Up a Scoreboard with an MP-80 Controller To properly configure your scoreboard, you will need two pieces of information: Board Type: This is a two-digit code programmed into both the scoreboard and controller. You can identify your board ...