Updating the Score on an MP-70/50 series controller.

Updating the Score on an MP-70/50 series controller.

Follow these steps to enter or update the score:
  1. Press HOME SCORE or VISITOR SCORE .
  2. Press one of the following keys to adjust the score by the increment indicated: +1 , +2 , +3 , -1 .
Additionally you could also adjust the score manually by following these steps:
  1. Press HOME SCORE or VISITOR SCORE .
  2. On the numeric keypad, enter the new score and then press ENTER .
Note:  When you are using the foul memory and points memory features in basketball, the process of updating the score is slightly different. See UPDATING SCORE/TRACKING PLAYER POINTS (MP-70 ONLY) on page 32. If hockey is the selected sport and your installation is equipped with goal indicator lights, the corresponding indicator will automatically illuminate for 15 seconds if the +1 key is used to advance either the home or visitor score. 
Note::  If the sport you are running is hockey, and you are using the numeric keypad to manually adjust your hockey scores, then the goal lights must be turned on and off manually (see MANUALLY CONTROLLING GOAL INDICATORS on page 44.


    • Related Articles

    • Updating the score (MP-80/60)

    • How to setup a scoreboard with an MP-80 controller.

      To update your scoreboard, you will need to know the following: The type of board you have. The board type is a two-digit code that is programmed into the scoreboard and controller. The current group number set on the scoreboard. To get the board ...

    • Setting up a Gen3 receiver with MP-73 or MP-53

      As with all wireless technology a receiver needs to be tuned to the correct frequency or band to receive a wireless signal from a specific transmitter. For our Generation 3 wireless radio's and controllers it's no different. Step 1: Get the ...

    • Why isn't my wireless control connecting to the scoreboard?

      Check group/channel number on the scoreboard and control to be sure they are on the same number. To check the scoreboard, power down the scoreboard for 20 seconds then turn power back on. The number that displays in the home or visitor score window ...

    • How to change the group number of an MP-73 controller

      The group number is important to the operation of the controller, it determines the RF channel used by the controller to communicate with the scoreboard. By setting the group number, you ensure that the controller is communicating on the correct ...