How to setup a scoreboard with an MP-80 controller.

How to setup a scoreboard with an MP-80 controller.

How to Set Up a Scoreboard with an MP-80 Controller

To properly configure your scoreboard, you will need two pieces of information:

  1. Board Type: This is a two-digit code programmed into both the scoreboard and controller. You can identify your board type by reviewing the attached documentation or by sending us a clear photo of the scoreboard model number or the scoreboard itself. We will assist you in determining the correct board type.

  2. Group Number: To identify the current group number assigned to your scoreboard, follow these steps:

    • Turn off your scoreboard and leave it off for approximately 10-15 seconds.

    • Turn the scoreboard back on. The group number will briefly appear on the scoreboard's display.

Setting Up Your MP-80 Controller

1. Set the Controller Sport and Group:

  • Press Menu

  • Press More twice

  • Select Equipment Setup

  • Choose Wireless

  • Select Controller

  • Enter the scoreboard’s group number

  • Select This Sport

2. Configure the Board Type:

  • Press Menu

  • Press More twice

  • Select Equipment Setup

  • Choose Wireless Scoreboard

  • Select Board Type

  • Enter the two-digit board type code

  • Press Enter

  • Enter the number displayed on your scoreboard. If none is displayed, enter 01

  • Press Enter again

3. Set the Scoreboard Group Number:

  • Press Menu

  • Press More twice

  • Select Equipment Setup

  • Choose Wireless Scoreboard

  • Select Group Number

  • Enter your desired group number (do not use 99 or 31)

  • Press Enter

  • Enter the number displayed on your scoreboard. If none is displayed, enter 01

  • Press Enter again

4. Confirm Controller Matches Scoreboard:

  • Press Menu

  • Press More twice

  • Select Equipment Setup

  • Choose Wireless

  • Select Controller

  • Re-enter the group number of your scoreboard

  • Select This Sport

If you encounter any issues or have further questions, please reach out to us at [email protected].


    • Related Articles

    • How to change the group number of an MP-73 controller

      The group number is important to the operation of the controller, it determines the RF channel used by the controller to communicate with the scoreboard. By setting the group number, you ensure that the controller is communicating on the correct ...

    • How do I change the group number on my scoreboard?

      ​ MP-80 Press Menu. Press More twice. Select Equipment Setup. Select Wireless. Select Scoreboard. Select Group Number. Enter the new group for the scoreboard on the keypad and press ENTER. The Scoreboard ID will show on the scoreboard or boards. Once ...

    • Setting up a Gen3 receiver with MP-73 or MP-53

      As with all wireless technology a receiver needs to be tuned to the correct frequency or band to receive a wireless signal from a specific transmitter. For our Generation 3 wireless radio's and controllers it's no different. Step 1: Get the ...

    • MP-70/50 Programming Codes and Set Up

      If you have recently purchased a new MP53/MP73 scoreboard, it is important to follow certain steps to ensure that it is properly set up for use. This guide will walk you through the process of factory resetting and setting up your scoreboard. Factory ...

    • Why isn't my wireless control connecting to the scoreboard?

      Check group/channel number on the scoreboard and control to be sure they are on the same number. To check the scoreboard, power down the scoreboard for 20 seconds then turn power back on. The number that displays in the home or visitor score window ...