What is G3 Wireless?

What is G3 Wireless?

The MP-73/53 Wireless G3 Option is the upgrade and replacement for the MP-70/50 Wireless Option and the MP-72/52 Wireless G2 Option. The MP-73/53 Wireless G3 Option uses the similar Spread Spectrum technology as the MP-72/52 but it uses a different transceiver hardware and firmware which results in allowing the user to easily assign scoreboard and controller combinations. The MP-73/53 allows you to control most indoor scoreboards and shot clocks, or most outdoor scoreboards and field timers from any location in the gym or on the field — without the need for wiring and cable conduit.  The wireless MP-73/53 controls are operated in a similar fashion to the MP-70/50 controls that have a standard cable connection.


Outdoor G3 Transceiver

G3 WIRELESS FEATURES
  1. Scoreboards within the same facility can easily change its operating mode from independent controllers (split mode) or to one main controller (single mode). Simply turn designated controllers off/on to automatically trigger the scoreboards to split from or join the operation of other scoreboards. Scoreboards automatically search for the next controller if its default controller is off. The G3 transceiver installed in the scoreboard uses a prioritized group list when searching for the controller or when it finds multiple controllers. The group number list is programmed via the controller.
  2. G3 Wireless can drive all new scoreboards, MP-69 data scoreboards and 6200 data scoreboards.
  3. Only the current MP-73/53 will have the programming in it that allows you to reconfigure the wireless through the controller interface.  G3 Wireless can be installed in the following controllers provided the controllers have been upgraded to the current MP-73/53 condition: MP-72, MP-52, MP-70, MP-50, MP-69, MP-68, BB-66, FB-66, BA-41B, and MP-71.
  4. Controllers can be easily reconfigured to operate other G3 wireless scoreboards.
  5. Through a new MP-73/53 with the latest programming, the user will be able to change settings in both the scoreboard and controller of the G3 Wireless cards. This means you can switch the group (channels) on the scoreboard from the controller.
  6. Settings can be programmed for multiple sports. This allows one controller to run multiple sports such that when the user switches the sports mode, the G3 Wireless automatically sets up the controller for the scoreboard it is supposed to be communicating to.
  7. The wireless card and radio is exactly the same for the controller and              scoreboard and are interchangeable. It should also be the same for any     accessory.
  8. Accessories like pitch speed guns can communicate directly to the scoreboard which allows for direct communication without an actual  scoreboard.
  9. ​Wireless clock and timer handswitches integrate into the MP-73/53 G3 Wireless and control the clock and timer functions to drive the scoreboard and timer displays.