As with all wireless technology a receiver needs to be tuned to the correct frequency or band to receive a wireless signal from a specific transmitter. For our Generation 3 wireless radio's and controllers it's no different. Step 1: Get the ...
The TIME IN switch allows you to start and stop the clock. You can also start and stop the clock with an optional hand switch. When the clock is stopped, the Time Out symbol appears on the LCD display. When the clock is running (TIME IN), an up or ...
To update your scoreboard, you will need to know the following: The type of board you have. The board type is a two-digit code that is programmed into the scoreboard and controller. The current group number set on the scoreboard. To get the board ...
If you have recently purchased a new MP53/MP73 scoreboard, it is important to follow certain steps to ensure that it is properly set up for use. This guide will walk you through the process of factory resetting and setting up your scoreboard. Factory ...
MP-80 Press Menu. Press More twice. Select Equipment Setup. Select Wireless. Select Scoreboard. Select Group Number. Enter the new group for the scoreboard on the keypad and press ENTER. The Scoreboard ID will show on the scoreboard or boards. Once ...